Inches to Pixels DPI Converter
Calculate pixel dimensions from a physical measurement and your chosen resolution. Multiply inches by the specified DPI: at 300 DPI, 4 inches equals 1,200 pixels.
For this conversion, DPI means the target image pixel density, technically called PPI. Use the resolution required for your project; there is no single pixel value for an inch.
Inches to pixels calculator
1,200 × 1,800 px
4 × 6 in at 300 DPI
Need ratio lock, more units or a visual preview? Open the full converter
How to convert inches to pixels
- Enter the physical length in inches.
- Enter the target resolution. For print work, use the image resolution requested by your print provider.
- Multiply the inches by that resolution to find the pixel length.
- For an image, calculate width and height separately using the same resolution.
Keep the original width-to-height ratio when converting an existing design. Changing that ratio requires cropping or stretching.
Formula and worked examples
Pixels = Inches × DPI
Here:
- Pixels is the digital length in pixels, abbreviated px.
- Inches is the intended physical length.
- DPI is the chosen conversion value, interpreted as image pixels per inch.
For a rectangular image:
Width in pixels = Width in inches × DPI
Height in pixels = Height in inches × DPI
An 8 × 10-inch image at 300 DPI
If your project requires 300 PPI:
Width: 8 × 300 = 2,400 px
Height: 10 × 300 = 3,000 px
The required dimensions are 2,400 × 3,000 pixels. These results are exact.
A 2.5-inch length at 96 DPI
2.5 × 96 = 240 px
At a specified density of 96 pixels per inch, 2.5 inches corresponds to exactly 240 pixels. The same length at another density produces a different result.
A fractional result at 150 DPI
1.23 × 150 = 184.5 px
A raster image needs whole-pixel dimensions. Rounding to the nearest whole pixel, with half values rounded up, gives 185 px.
Round only the final result. If a production specification sets a minimum pixel count, round upward. Rounding width and height independently can slightly alter the aspect ratio, so check the final dimensions when precise proportions matter.
Inches-to-pixels reference table
All values below are exact. The DPI column represents the target image density in PPI for this calculation.
| Specified DPI | 1 inch | 4 inches | 6 inches |
|---|---|---|---|
| 72 DPI | 72 px | 288 px | 432 px |
| 96 DPI | 96 px | 384 px | 576 px |
| 150 DPI | 150 px | 600 px | 900 px |
| 300 DPI | 300 px | 1,200 px | 1,800 px |
| 350 DPI | 350 px | 1,400 px | 2,100 px |
| 400 DPI | 400 px | 1,600 px | 2,400 px |
| 600 DPI | 600 px | 2,400 px | 3,600 px |
For example, a 4 × 6-inch image at 300 DPI requires 1,200 × 1,800 pixels. At 72 DPI, the same physical size corresponds to 288 × 432 pixels.
Choose the right resolution for the job
DPI and PPI describe different things
PPI means pixels per inch: the image pixels assigned to each inch of output. DPI means dots per inch: the dots a printer can produce. These are distinct measurements.
When a print specification uses “300 DPI” to request a 300 PPI image, use 300 in the calculation. Do not substitute a printer’s hardware DPI rating for the required image PPI.
Physical size and pixel dimensions work together
Inches describe physical size; pixel dimensions describe the image’s digital width and height. At a fixed physical size, a higher target PPI requires more pixels.
Changing an existing image’s resolution setting without resampling does not add pixels. It changes the relationship between its print size and pixel density. Resampling changes the pixel count, so calculating a larger target alone does not improve the source image.
Screen measurements need context
Do not assume every screen has 72 or 96 physical pixels per inch. CSS defines 1 inch as 96 CSS pixels, but CSS pixels are not necessarily individual device pixels or a literal physical measurement on a screen.
For an image upload, follow the destination’s required pixel dimensions. For printing, follow its physical-size and image-resolution requirements.
EXPERT GUIDANCE
Short answers to the questions people ask most on this topic.
Use 300 as the target resolution and multiply each inch measurement by 300. For example, a 5 × 7-inch image requires 1,500 × 2,100 pixels at 300 PPI.
There is no unique answer without a target pixel density. A 2-inch length corresponds to 144 pixels at 72 PPI, 192 pixels at 96 PPI, or 600 pixels at 300 PPI.
If your print provider requires bleed, calculate from the full artwork size including that bleed. For example, a 4 × 6-inch design with 0.125-inch bleed on every side becomes 4.25 × 6.25 inches. At 300 PPI, that is 1,275 × 1,875 pixels. Use your provider’s actual bleed specification.